The 1593HAMARGY is a light gray plastic enclosure designed for Arduino boards, listed as compatible with the Leonardo, M0 Pro, Uno and Yun. It gives makers, educators and OEM engineers a finished housing with openings that keep I/O connectors and often-used controls and LEDs accessible.

The 1593HAMARGY is molded from general purpose ABS plastic with a satin texture and a UL94 HB flame rating, in light gray. It measures 2.95 in x 2.81 in x 1.06 in (75 mm x 71 mm x 27 mm), with an inside width of 67.89 mm [2.67 in] and an inside height of 22.00 mm [0.87 in]. A recessed inlay on the cover (68.69 mm x 66.69 mm, 0.80 mm deep) is dimensioned on the drawing.

Each assembly ships with top and bottom covers, three front panels (for the Yun, Uno and Leonardo / M0 Pro), two rear panels (one blank and one that clears the Yun micro SD card), two cover screws, two screws to secure the Arduino board, four self-adhesive rubber feet and an instruction sheet. Panels can be swapped to suit the board you are housing; an Arduino 101 panel is sold separately. The board itself is not included.

• Cover secured with self-tapping screws; inside top accepts a #4 self-tapping screw
• Back cover accepts an M2.6 self-tapping panel screw
• Recommended cover screw torque: 57 lbf-in (40 cN-m)
• RoHS and REACH compliant; shipped shrink wrapped at 0.13 lbs (0.06 kg)

Need a plain box instead? The same enclosure is offered without cutouts in the 1593 series (1593AR). The 1593HAMARGY can also be factory modified with milling, drilling or printing, and solid models are available in .stp or .x_t. Avoid acetone, ketones, thread-locking compounds and strong solvents, which can damage ABS.