The 1555QF17GY is the low-profile, general purpose ABS model in the Q size of the 1555F Series watertight flanged enclosures. It suits electronics designers and panel builders who need a sealed, wall-mounted housing for a printed circuit board, small panel or DIN rail mounted components in indoor locations.
The body measures 5.55 x 5.51 x 1.46 in (141 x 140 x 37 mm) not including flanges. The drawing shows 180.00 mm [7.09 in] overall length with the flanges, 158.00 mm [6.22 in] flange hole spacing, a 37.20 mm [1.46 in] assembled height, 17.00 mm [.67 in] inner box depth and 12.00 mm [.47 in] inner lid depth. Shipping weight is 0.58 lbs (0.26 kg).
ABS versions are molded from general purpose UL94-HB material for indoor use. They are not UL listed but have been tested to and meet IP66, carry an IK07 impact rating per IEC 62262:2021 and have a recommended operating temperature of -20°C to +60°C (-4°F to +140°F).
Accessories for the 1555QF17GY include the 1554QPL steel inner panel and the 1554QGASKET replacement gasket pair. A UL listed polycarbonate equivalent is available as 1555Q2F17GY.
| Series | 1555F Series, Type 4X, 6P Enclosures (Watertight, Flanged Lid) |
| Material | General Purpose ABS |
| CAD Models | Solid models available in .stp or .x_t |
| Part Number | 1555QF17GY |
| Long Description | RAL7035 grey watertight plastic enclosure, flange |
| Short Description | ABS FLANGED BASE NEMA ENCL. |
| Factory Modification | Enclosures can be factory modified (milling, drilling, printing etc.) |
| Polycarbonate (UL Listed) Equivalent Part Number | 1555Q2F17GY |
| Inner Box Depth | 17.00 mm [.67 in] |
| Inner Lid Depth | 12.00 mm [.47 in] |
| Lid Inlay Width | 134.00 mm [5.28 in] |
| Lid Inlay Length | 107.00 mm [4.21 in] |
| Flange Mounting Holes | 4X Ø5.00 mm [.20 in] |
| Size L X W X H (Part Page) | 5.51 in x 5.51 in x 1.46 in (140 mm x 140 mm x 37 mm) |
| Body Length X Width (Drawing) | 141.05 mm [5.55 in] x 140.13 mm [5.52 in] |
| Width (Not Including Flanges) | 5.51 in (140 mm) |
| Height (Not Including Flanges) | 1.46 in (37 mm) |
| Length (Not Including Flanges) | 5.55 in (141 mm) |
| Overall Height, Assembled (Drawing) | 37.20 mm [1.46 in] |
| Flange Mounting Hole Spacing (Drawing) | 158.00 mm [6.22 in] |
| Overall Length Including Flanges (Drawing) | 180.00 mm [7.09 in] |
| UPC | 623980043296 |
| UNSPSC | 39121301 |
| Drawing Revision | REV 23.08.2022 |
| DIN Rail | Internal DIN rail mounting tabs molded into lid |
| Mounting | Designed for wall mounting via base mounting flanges |
| Internal Standoffs | Standoffs molded in the lid and enclosure interior for PC board or inner panel; accept #4 x 1/4" self-tapping screws |
| Inner Panel (Order Separately) | 1554QPL (galvanized steel) |
| Self-Tapping Screw (Order Separately) | 1555TS100 (Steel Panel / P.C. Board Self Tapping Screw, #4 x 1/4" (6.4mm), Plated) |
| Shipping Weight | 0.58 lbs (0.26 kg) |
| Finish | Satin texture RAL7035 grey |
| Gasket | One-piece, high temperature, UL listed silicone; supplied loose inside the enclosure (not pre-installed) |
| Included | Styled box, flanged lid, 4 cover screws and preformed silicone gasket |
| Lid Seal | Gasketed lid with two-piece tongue and groove construction; protection against access of oil, dust and water |
| Lid Surface | Smooth recessed surface on lid for a membrane keypad or label |
| Lid Fasteners | Included M4 stainless steel machine screws threaded into corrosion resistant bushings (M4 corrosion resistant inserts) for repetitive assembly and disassembly; lid screws are behind the lid |
| Replacement Lid Screws | SC576-50 (Stainless Steel Cover Screws, M4-0.7 x 20mm, Pkg 50) |
| Replacement Gasket (Pair) | 1554QGASKET |
| Recommended Cover Screw Torque | 2.5 lbf-in (30 cN-m) |
| Intended Use | Indoor use (ABS versions) |
| Impact Rating | IK07 per IEC 62262:2021 |
| Chemical Resistance | Some chemicals can damage or weaken plastic; avoid acetone, ketones, ethers, aromatic and chlorinated hydrocarbons, thread-locking compounds, cutting/tapping fluid, water detection paste, anti-seize paste, strong solvents and some greases and oils |
| Flame Rating (Material) | UL94-HB (general purpose ABS) |
| Ingress Protection (Series) | Tested to and meets IP66 (ABS versions) |
| Recommended Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| UL Listing | Not UL listed (ABS versions); drawing note: General Purpose ABS version is not UL approved |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
| UL File # (Part Page) | E65324 |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
It measures 5.55 x 5.51 x 1.46 in (141 x 140 x 37 mm) not including flanges, and 180.00 mm [7.09 in] long including flanges per the drawing.
No. ABS versions are not UL listed, but they have been tested to and meet IP66.
ABS versions are specified for indoor use. The UV stabilized polycarbonate equivalent, 1555Q2F17GY, is intended for outdoor use.
Included M4 stainless steel machine screws threaded into corrosion resistant bushings. Replacement M4 x 20mm screws are part number SC576-50.
The drawing lists a styled box, flanged lid, 4 cover screws and a preformed silicone gasket.
Hammond Manufacturing · 001100
Hammond Manufacturing · 001102
Hammond Manufacturing · 001104
Hammond Manufacturing · 001106
Hammond Manufacturing · 001111
