The 1555HGY is a 180 x 120 mm general purpose ABS enclosure with a 61 mm total height, finished in light gray RAL 7035. Part of the 1555 Series, it gives indoor electronics projects a generous floor area for circuit boards or DIN rail components under a styled, gasketed lid.
This ABS version carries a UL94 HB flame rating and is intended for indoor use. It is not UL listed but has been tested to and meets IP66, with an IK07 impact rating per IEC 62262:2021 and a recommended operating range of -20°C to +60°C (-4°F to +140°F). For UL 508A listing and outdoor use, choose the polycarbonate 1555H2GY.
Internal space is 172.91 x 108.91 mm with 52.00 mm of height, and the enclosure accepts a P.C. board up to 106.68 x 167.13 mm. Molded DIN rail tabs, M3 integral brass inserts, standoffs for #6 self-tapping screws and vertical card guides for 1.5 mm boards are built in; the 1554HPL steel inner panel is sold separately.
The lid provides a smooth recessed face for a membrane keypad or label and seals on a tongue and groove joint using a replaceable one-piece silicone gasket supplied loose. Four self captivating M4 stainless steel screws secure it at 43-57 ozf-in (30-40 cN-m). Shipping weight is 0.57 lbs (0.26 kg).
| Lid Standoffs | Molded in the lid interior, for #6 self-tapping screws |
| PC Card Guides | Vertical, for 1.5 mm thick P.C. boards |
| Internal Mounting | Molded DIN rail mounting tabs; M3 integral brass inserts and standoffs for #6 self-tapping screws |
| Wall Mounting Holes | 4 x 4.00 mm [0.16 in] diameter, located outside the gasket channel |
| Inner Panel (Order Separately) | 1554HPL steel inner panel, fits in box or lid |
| Foot Kit (Uses Wall Mounting Holes) | 1554FT |
| Type | Water-tight |
| Series | 1555 Series – Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures |
| Size Code | 1555H Regular Enclosure |
| Description | RAL7035 grey watertight plastic enclosure |
| Part Number | 1555HGY |
| Short Description | 180X120X60MM ABS NEMA ENCL. |
| Polycarbonate UL Listed Equivalent (Gray Lid) | 1555H2GY |
| Inside Width | 108.91 mm [4.29 in] |
| Inside Height | 52.00 mm [2.05 in] |
| Inside Length | 172.91 mm [6.81 in] |
| Size (L X W X H) | 7.1 in x 4.7 in x 2.4 in (180 mm x 119 mm x 61 mm) |
| Max. P.C. Board Width | 167.13 mm |
| Max. P.C. Board Length | 106.68 mm |
| Width (Ordering Table) | 4.72 in (120 mm) |
| Length (Ordering Table) | 7.09 in (180 mm) |
| Total Height (Ordering Table) | 2.40 in (61 mm) |
| UPC | 623980842585 |
| UNSPSC | 39121301 |
| Packaging Type | Shrink wrap |
| Shipping Weight | 0.57 lbs (0.26 kg) |
| Lid | Styled lid with smooth recessed surface for a membrane keypad or label |
| Color | Light Gray (RAL 7035) |
| Included | 4 cover screws, and preformed silicone gasket |
| Lid Seal | Two-piece tongue and groove construction with replaceable one-piece silicone gasket (high temperature, UL listed silicone), supplied loose |
| Material | ABS Plastic |
| Lid Screws | M4 stainless steel machine screws, self captivating, threaded into M4 corrosion resistant inserts |
| Qty Of Lid Screws | 4 |
| Replacement Gasket | 1554HGASKET (silicone pre-formed gasket, black, pkg 2) |
| Factory Modification | Milling, drilling, printing etc. available from the factory; solid models available in .stp or .x_t |
| Panel / PC Board Screws | 1591MM100 (M3-0.5 x 8 mm plated, pkg 100); 1598ATS100 (#6 x 1/4 in (6.4 mm) self-tapping, plated, pkg 100) |
| Replacement Cover Screws | SC576-50 (stainless steel M4-0.7 x 20 mm, pkg 50) |
| Recommended Cover Screw Torque | 43-57 ozf-in (30-40 cN-m) |
| IP Rating | IP66 |
| Impact Rating | IK07 per IEC 62262:2021 |
| Chemical Resistance | Avoid acetone, ketones, ethers, aromatic and chlorinated hydrocarbons, thread-locking compounds, cutting/tapping fluid, strong solvents; see Chemical Resistance Statement |
| Intended Environment | Indoor use |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F), recommended |
| UL Listing | Not UL listed (general purpose ABS version) |
| Flame Rating | UL94 HB |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
No. The ABS version is not UL listed. The polycarbonate 1555H2GY is cUL and UL 508A listed.
The 1555HGY is rated IP66.
172.91 mm x 108.91 mm with 52.00 mm of inside height.
Yes, four M4 stainless steel lid screws are included along with the preformed silicone gasket.
The recommended range for ABS versions is -20°C to +60°C (-4°F to +140°F).
Hammond Manufacturing · 001100
Hammond Manufacturing · 001102
Hammond Manufacturing · 001104
Hammond Manufacturing · 001106
Hammond Manufacturing · 001111
