The 1550Z108F is a thick-wall, watertight diecast aluminum enclosure with a flanged base, built for electronic instruments, controls and connectors that need protection against dust and water. It is cUL and UL listed under file #E71073 and independently tested to IP66, IP67 and IP68 and NEMA Type 4, 4X, 12 and 13. A black textured version is offered as 1550Z108FBK.
The 1550Z108 size shares the 125 x 80 mm footprint and 16 mm lid of the 1550Z107 but is deeper: 59 mm total depth and 50.80 mm [2.00 in] inside depth, 152 x 81 x 61 mm overall, for a board up to 70.14 mm by 115.14 mm. Nominal body size is 4.92 in (125 mm) long by 3.15 in (80 mm) wide with a total depth of 2.32 in (59 mm) and a lid height of 0.63 in (16 mm); shipping weight is 1.19 lbs (0.54 kg).
Box and lid are made from diecast aluminum alloy that is tough yet easy to machine, and there are no internal ribs, so connectors can be installed without interference or additional milling. Two-piece tongue and groove construction and a pre-formed, one-piece silicone rubber gasket rated -40°C to +150°C (-40°F to 302°F) keep out dust and water. This unpainted version is vibra finished for a smooth natural-aluminum surface with no sharp edges.
A strong spot-welded bottom flange makes surface mounting straightforward. The lid is secured with four stainless steel Phillips head M4 - 0.7 x 25mm machine screws that sit outside the gasket area, eliminating the need for o-rings; the recommended cover screw torque is 5-7.5 lbf.in (50-75 cN.m). On this size the lid screws are self-captivating: the lid holes are slightly undersized and threaded with the first installation. The box accepts an M4-0.7 machine ground screw. The enclosure carries an IK08 impact rating per IEC62262 and is RoHS and REACH compliant.
| Type | Thick wall, water-tight |
| Series | 1550ZF Series - Watertight Diecast Aluminum Enclosures w/ Flanges |
| Included | Box, lid, silicone gasket, and 4 cover screws |
| Description | watertight diecast enclosure - FLANGED |
| Part Number | 1550Z108F |
| Short Description | 1550Z WITH FLANGED BASE |
| Lid Height | 0.63 in (16 mm) |
| Inside Depth | 50.80 mm [2.00 in] |
| Inside Width | 70.64 mm [2.78 in] |
| Inside Length | 116.04 mm [4.57 in] |
| Nominal Size - Width | 3.15 in (80 mm) |
| Max. P.C. Board Width | 115.14 mm |
| Nominal Size - Length | 4.92 in (125 mm) |
| Max. P.C. Board Length | 70.14 mm |
| Size L X W X H (Overall) | 5.98 in x 3.17 in x 2.42 in (152 mm x 81 mm x 61 mm) |
| Nominal Size - Total Depth | 2.32 in (59 mm) |
| Body Length (Excluding Flange) | 125.40 mm [4.94 in] |
| UPC | 623980108445 |
| UNSPSC | 39121301 |
| Drawing Revision | REV: 03.07.2024 |
| Shipping Weight | 1.19 lbs (0.54 kg) |
| Color | Natural Aluminum (series table: Unpainted) |
| Finish | Unpainted, vibra finished for a smooth surface with no sharp edges |
| Gasket | Pre-formed, one-piece silicone rubber; installs into lid groove |
| Material | Aluminum (Die-Cast Alloy); box and lid made from diecast aluminum alloy |
| Mounting | Spot-welded bottom flange |
| Construction | Two piece tongue and groove; thick wall; no internal ribs |
| Solid Models | Available in .stp or .x_t |
| Lid Fastening | 4 stainless steel Phillips head machine screws, M4 - 0.7 x 25mm, located outside the gasket protection area (no o-rings needed) |
| Factory Modification | Can be factory modified (milling, drilling, printing etc.) |
| Ground Screw Provision | Accepts M4-0.7 machine ground screw |
| Gasket Temperature Rating | -40°C to +150°C (-40°F to 302°F) |
| Self-Captivating Lid Screws | Yes - lid holes are slightly undersized and threaded with the first installation |
| Recommended Cover Screw Torque | 5-7.5 lbf.in (50-75 cN.m) |
| IP Rating | IP68 (independently tested to IP66, IP67 and IP68) |
| NEMA Rating | 4, 4X, 12 & 13 |
| Impact Rating | IK08 per IEC62262 |
| UL / CUL | cUL and UL listed under file #E71073 |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
| Colour Variant | 1550Z108FBK (Black Textured) |
| Replacement Gaskets (Pair) | 1550Z107GASKET - Pre-Formed Silicone Gasket (2 Pack) |
| Replacement Lid Screw Pack | SC1550Z107-50 - Stainless Steel Cover screws [M4 - 0.7 x 25mm] (50 Pack) |
| Compatible Ground Screw Pack | SCGM4-50 - Copper plate Ground Hardware: M4 - 0.7 X 6mm screw, M4 Washer (50 Pack) |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
It is cUL and UL listed under file #E71073, independently tested to IP66, IP67 and IP68 and NEMA Type 4, 4X, 12 and 13, and carries an IK08 impact rating per IEC62262. The manufacturer advises customers to conduct their own testing for any specific application.
The maximum P.C. board size is 70.14 mm long by 115.14 mm wide. Inside depth is 50.80 mm [2.00 in] and inside length is 116.04 mm [4.57 in].
The purchased assembly includes the box, lid, silicone gasket and 4 cover screws (M4 - 0.7 x 25mm stainless steel). Ground hardware is sold separately as SCGM4-50.
It has a strong spot-welded bottom flange for easy mounting. Overall size including the flange is 5.98 in x 3.17 in x 2.42 in (152 mm x 81 mm x 61 mm).
Replacement gaskets are 1550Z107GASKET (pair) and replacement lid screws are SC1550Z107-50 (50 Pack of M4 - 0.7 x 25mm stainless steel cover screws). Recommended cover screw torque is 5-7.5 lbf.in (50-75 cN.m).
No. The 1550Z108F is unpainted and vibra finished for a smooth surface with no sharp edges. The textured black powder-coated version is 1550Z108FBK.
Hammond Manufacturing · 001100
Hammond Manufacturing · 001102
Hammond Manufacturing · 001104
Hammond Manufacturing · 001106
Hammond Manufacturing · 001111
