The 1457T1602EBK is a wide-body EMI/RFI shielded enclosure: a 160 mm long extrusion roughly 165 mm wide and 55 mm tall, finished with flanged end panels with integrated wall-mounting flanges. It takes boards up to 159 x 159 mm (part data), so larger control and interface boards can be housed in a single shielded aluminum case.
The body is one piece of extruded aluminum 6063 with a minimum thickness of 0.06" (1.5 mm) and a 0.75 mm (0.030") deep recess for a label or membrane keypad. The extruded body is finished in black powder coat, and the two Type 380 diecast aluminum end panels are painted in a durable black satin powder paint, giving an all-black exterior. Full perimeter conductive foam/fabric gaskets of Ni/Cu (nickel/copper) with conductive pressure sensitive adhesive seal each end panel to the body.
Nominal size is 6.3 in x 6.51 in x 2.15 in (160 mm x 165 mm x 55 mm), with an inside face-to-face dimension of 160.00 ±0.50 mm [6.299 ±0.020 in]. PC boards slide horizontally into internal slots extruded into the body; part data lists a maximum board of 159 mm x 159 mm, and the drawing notes "Fits 160mm (6.299") X 160mm (6.299") PCB". Shipping weight is 1.46 lbs (0.66 kg).
Integrated flanges on the end panels let the 1457T1602EBK be screwed to a wall or panel; the drawing shows 191.97 mm [7.558 in] overall length with flange mounting holes on 179.75 mm [7.077 in] centres. If you prefer a free-standing box, the same body is offered with flat end panels as 1457T1601EBK. Assembly uses #6 Taptight thread forming screws with O-rings, black zinc plated to ASTM B633-13 (Type II, SC3); the recommended screw torque is 5 lbf/in.
The enclosure is designed to meet IP54 and is RoHS and REACH compliant. Note that the EMI gaskets are not water-tight. Solid models are available in STEP or IGES, and the factory can mill, drill or print the enclosure.
| Type | EMI/ RFI Shielded |
| Series | 1457-EMI Series (EMI/RFI Shielded Extruded Aluminum Enclosures) |
| Product Type | EMI/RFI shielded extruded aluminum enclosure |
| End Panel Style | Flanged end panels (EMI shielded w/ flanges) |
| Equivalent Without Flanges | 1457T1601EBK |
| Size (L X W X H) | 6.3 in x 6.51 in x 2.15 in (160 mm x 165 mm x 55 mm) |
| Width (Series Table) | 165.50 mm |
| Height (Series Table) | 54.00 mm |
| Overall Width (Drawing) | 168.46 mm [6.632 in] |
| Overall Height (Drawing) | 56.98 mm [2.243 in] |
| Extrusion Height (Drawing) | 54.00 mm [2.126 in] |
| Inside Face-To-Face Dimension | 160.00 ±0.50 mm [6.299 ±0.020 in] |
| Extrusion Length (Series Table) | 160.00 mm |
| Length Over End Panels (Drawing) | 171.15 mm [6.738 in] |
| Flange Mounting Hole Centres (Drawing) | 179.75 mm [7.077 in] |
| Overall Length Incl. Mounting Flanges (Drawing) | 191.97 mm [7.558 in] |
| UPC | 623980032283 |
| UNSPSC | 39121301 |
| Part Number | 1457T1602EBK |
| Short Description | 1457T 160mm ENCL BK EMI VER2 |
| Board Format | Sized for standard Eurocards |
| Drawing Note | Fits 160mm (6.299") X 160mm (6.299") PCB |
| Board Mounting | PC boards mount horizontally by sliding into internal slots extruded into the enclosure body |
| Max. PCB Width (Part Data) | 159 mm |
| PCB Slot Spacing (Drawing) | 161.00 ±0.75 mm [6.339 ±0.030 in] |
| Max. PCB Length (Part Data) | 159 mm |
| Max. PCB Width (Series Table) | 160.00 mm |
| Max. PCB Length (Series Table) | 160.00 mm |
| Included | Extruded body, two diecast end panels, two adhesive conductive end plate gaskets, #6 Taptight screws with O-rings, self adhesive rubber feet |
| Packaging Type | shrink wrap |
| Shipping Weight | 1.46 lbs (0.66 kg) |
| Replacement EMI Gaskets | 1457TEG-10 (10-pack) |
| Replacement End Panel Kits | 1457TEPF (2-pack), 1457TEPF-10 (10-pack) |
| Replacement Assembly Screws | 1457MS100 (pack of 100) |
| Body | One piece of extruded aluminum 6063, minimum thickness 0.06" (1.5 mm) |
| Color | Black |
| Material | Aluminum (Extruded) |
| CAD Models | Solid models available in STEP or IGES |
| End Panels | Type 380 diecast aluminum, black powder paint finish |
| EMI Gaskets | Full perimeter conductive foam/fabric gaskets, Ni/Cu (nickel/copper) with CPSA (conductive pressure sensitive adhesive) |
| Label Recess | 0.75 mm (0.030") deep recess for labels/keypads |
| Assembly Screws | #6 Taptight thread forming screws with O-rings, black zinc plated to ASTM B633-13 Type II (96 hour salt spray test), SC3 severe rating (12 micron coating) |
| Extrusion Color | Black Powder Coat |
| Factory Modification | Milling, drilling, printing etc. available from the factory |
| Recommended Screw Torque | 5 lbf/in |
| Wall Dimension (Drawing) | 2.00 ±0.20 mm [0.079 ±0.008 in] |
| IP Rating | IP54 |
| Gasket Note | EMI gaskets are not water-tight |
| RoHS Compliant | Yes |
| REACH Compliant | Yes |
Business account holders get access to exclusive pricing, volume discounts, and dedicated support. Create a free account to get started.
Part data lists a maximum PC board of 159 mm long by 159 mm wide (the series table gives 160.00 x 160.00 mm), and the drawing notes "Fits 160mm (6.299") X 160mm (6.299") PCB". Boards slide horizontally into slots extruded into the body.
Yes. It uses flanged end panels with integrated wall-mounting flanges; the drawing shows 191.97 mm [7.558 in] overall length and flange holes on 179.75 mm [7.077 in] centres. The flat-panel version is 1457T1601EBK.
It is designed to meet IP54. The spec sheet notes that the EMI gaskets are not water-tight.
The extruded body, two diecast aluminum end panels, two adhesive conductive end plate gaskets, #6 Taptight screws with O-rings and self adhesive rubber feet. Replacement screws are sold in packs of 100 as 1457MS100.
The extruded body is black powder coat and the Type 380 diecast end panels are black powder painted.
End panel kits 1457TEPF (2-pack) and 1457TEPF-10 (10-pack), and EMI gaskets 1457TEG-10 (10-pack), are listed for enclosures beginning with 1457T.
Hammond Manufacturing · 001100
Hammond Manufacturing · 001102
Hammond Manufacturing · 001104
Hammond Manufacturing · 001106
Hammond Manufacturing · 001111
