The 1427NCGM16G is a gray nylon M16x1.5 cordgrip from the 1427NCG liquid-tight series. It seals and anchors a cable where it enters or leaves an enclosure, and its RAL 7035 gray finish suits installers and OEM builders who want the gland to blend with a light-gray housing.

It is sized for cable from 4 mm (0.16 in) to 8 mm (0.31 in). An NBR (nitrile rubber) seal behind a large opening accepts a wide range of diameters, while the strain relief elements tighten in a circular sequence on the sealing ring to hold the cable without twisting or damaging it. Pick the cordgrip with the smallest maximum diameter that fits; for 5–10 mm cable on the same thread, see the 1427NCGM16LG.

The 1427NCGM16G fits a 16 mm (0.63 in) mounting hole, with an outer length (L) of 22 mm (0.87 in) and inner thread length (T) of 8 mm (0.31 in). It comes with a nylon locknut and EPDM o-ring. Guide torque for M16 (small) is 1–2 N-m on the sealing nut and 1.5–2.5 N-m on the locknut; actual values can vary depending on the application.

The series is designed to meet NEMA Type 4, 4X, 6, 6P, 12 and 13 with protection to IP68, carries a UL94 V-2 flammability rating and is UL listed. It operates from -40°C to 100°C static (up to 120° instantaneous) and -20°C to 80°C dynamic (up to 100° instantaneous). RoHS and REACH compliant; bag packed at 0.02 lbs (0.01 kg). Black equivalent: 1427NCGM16B.