The 1427BCGPG9 is a PG9-thread liquid-tight cordgrip made from nickel plated brass. It is used where a cable enters or leaves an enclosure and gives technicians and OEM builders a sealed, strain-relieved entry for small control and power cords.

It accepts cable from 4 mm (0.16 in) to 8 mm (0.31 in) in diameter. The large opening and NBR (nitrile rubber) seal cope with a wide range of diameters, and the strain relief elements tighten in a circular sequence on the sealing ring so the cable is secured without twisting or damage. Choose the cordgrip with the smallest maximum diameter that fits your cable.

The 1427BCGPG9 mounts in a 15 mm (0.59 in) hole. Outer length (L) is 21 mm (0.83 in) and inner thread length (T) is 6 mm (0.24 in). A locknut and EPDM o-ring are included. Guide torque for PG9 is 2–3 N-m on the sealing nut and 3.5–4.5 N-m on the locknut; actual values can vary depending on the application.

The 1427BCG series is designed to meet NEMA Type 4, 4X, 6, 6P, 12 and 13, offers protection to IP68 and is UL listed. It works from -40C to +100C with temporary heat resistance up to 120C. The part is RoHS and REACH compliant and ships in a bag at 0.05 lbs (0.02 kg).