George Risk Industries 190-12WG-W Wide-Gap Magnetic Switch Set

Provide open/closed status monitoring at a protected movable opening with a white, wide-gap magnetic switch set and attached 12-inch wire leads. Magnetic contacts are used where a monitored panel, alarm input, access-control controller, or automation circuit needs to detect separation between the switch and its matching magnetic actuator. The wider-gap configuration supports installations where normal mounting geometry leaves more space between the two contact components than a close-gap contact permits. The 190-12WG-W-IND suits white-finished doors, frames, cabinets, gates, and similar openings where the contact assembly should remain visually discreet. Its 12-inch wire leads provide a short pigtail connection from the switch assembly to field wiring, terminal blocks, or an enclosure connection point. Select the lead length based on the available routing path and provide suitable protection where wiring passes through moving, exposed, or high-wear areas. This specific configuration combines a white finish, wide-gap operation, and 12-inch leads in a bagged switch-set package. Verify the required contact state, electrical ratings, mounting arrangement, gap distance, actuator placement, and compatibility with the connected monitoring circuit before installation. George Risk Industries 190-12WG-W-IND is intended for applications requiring a magnetic switch set rather than a standalone alarm, controller, or access-control reader.