George Risk Industries 4400A Biased Switch Set with 48 in. Armored Cable

Add a biased switching assembly to a physical-security circuit where the connection needs mechanical protection along its run. George Risk Industries 4400AB-48 combines the 4400A switch set with 48 in. of armored cable, establishing a defined cable length between the switch assembly and its field-wiring connection. The armored cable is the central physical characteristic of this configuration. This is an accessory component for physical-security systems rather than a standalone control panel. This configuration suits wired security and monitoring circuits that call for a biased switch and protected cable at the device end. Armor around the cable helps address locations where an unprotected lead may be exposed to handling or incidental damage. The 48 in. length gives a practical allowance for locating the switch assembly while keeping the armored section integral to the set. It keeps the transition from the device assembly to field wiring covered by armored cable. Within the 4400A range, select this version when the required combination is a biased switch set and 48 in. armored cable. It is supplied as a switch-set assembly, not described as cable alone, so the ordering code identifies both the switching component and its attached protected cable section. Match the switch configuration to the connected physical-security control circuit and installation method before installation.