George Risk Industries 194-12-W 1-Inch Recessed SPDT Steel Door Contact

Provide a concealed open/close signal for a steel door by recessing the contact assembly into the door and frame. The George Risk Industries 194-12-W uses an SPDT contact arrangement, giving the connected alarm input a changeover circuit rather than a single fixed contact state. Its 1-inch recessed format keeps the sensing hardware within prepared mounting holes, supporting a cleaner finished opening than an externally mounted contact. Use the 12-inch leads to terminate the contact at the low-voltage cabling path within the frame or adjacent wall cavity. This configuration suits intrusion alarm zones, access-control door-status inputs, and other opening-monitoring circuits that accept an SPDT contact. The white housing suits installations where the recessed component remains visible at the surface after fitting. Select this configuration when the opening calls for a recessed contact intended for a steel door and a changeover output is required by the control panel or input module. Confirm mounting-hole preparation and wiring method against the door construction before installation. Part number 194-12-W identifies the 1-inch, 12-inch-lead, white configuration, helping distinguish it from contacts with different mounting styles, lead lengths, or contact arrangements.