Eaton N390-33M-8LC-AP 33 m OS2 MPO to LC Breakout Cable

Break out an 8-fiber APC MPO trunk connection into four duplex LC/APC connections with a single 33 m fiber assembly. The cable uses OS2 8.3/125 µm singlemode fiber for long-reach optical infrastructure and provides an MPO-to-LC transition without installing separate fan-out hardware at the endpoint. Its MPO female connector presents eight fibers at the trunk side, while the four LC/APC duplex ends provide eight individual fiber positions for connected optical links. Use this cable where a high-density MPO backbone must terminate at equipment, patching fields, or optical interfaces built around duplex LC connections. The APC connector geometry is suited to fiber paths that require angled physical-contact terminations at both the MPO trunk connection and the LC endpoints. The breakout construction keeps all eight fibers in one managed cable run rather than requiring four separate duplex jumpers between locations. N390-33M-8LC-AP specifically combines a 33 m reach, eight-fiber MPO interface, OS2 singlemode construction, and four LC/APC duplex breakout ends. That combination suits installations where the required cable route is longer than a local patch lead and where the endpoint count calls for four duplex LC paths from one MPO connection. Match the MPO connector type, APC polishing requirement, fiber count, and required routing length to the installed optical path before installation.