Eaton N390B-27M-8AP 27 m OM4 8-Fiber MPO Patch Cable

Connect MPO-equipped equipment across a 27 m multimode fiber path with an 8-fiber MPO-to-MPO patch cable built around OM4 50/125 fiber. Female MPO connectors at both ends provide a direct connection between compatible MPO interfaces, patching hardware, or preterminated fiber infrastructure. The eight-fiber construction suits links that use a parallel-optics fiber arrangement rather than individual duplex connectors. APC-polished MPO endfaces are a defining connector requirement for this cable. The angled physical-contact interface must mate with compatible APC MPO hardware; it should not be substituted for a cable with a different polish type. Type B polarity also matters during link planning. This polarity method reverses the fiber position sequence from one connector end to the other, supporting installations whose MPO trunks, cassettes, and equipment interfaces are mapped for Type B connectivity. Eaton N390B-27M-8AP provides the specified 27 m reach where a shorter patch lead cannot span the route between racks, patch fields, or optical equipment. Verify the required fiber count, OM4 multimode medium, female MPO mating interfaces, APC polish, and Type B polarity before installation. Keep connector endfaces protected until mating, inspect them before connection, and preserve the cable's routing path so the MPO connectors and fiber jacket are not subjected to excessive strain.