Eaton N845B-26M-8AP 26 m OM4 8-Fiber MPO Patch Cable

Connect two MPO interfaces across a 26 m multimode fiber path with an eight-fiber cable assembly built around OM4 50/125 µm fiber. Female MPO connectors at both ends provide an MPO-to-MPO connection, while APC connector polish supports angled physical-contact mating. The cable uses Type B polarity, an important configuration detail when matching trunk, cassette, and equipment-side fiber paths. Eaton N845B-26M-8AP addresses installations where a fixed 26 m cable length is needed between high-density optical connection points. Its eight-fiber construction is distinct from broader-fiber-count MPO assemblies and should be matched to equipment and passive infrastructure that use an eight-fiber MPO interface. Verify end-to-end polarity through the complete channel before installation, especially where cassettes or polarity-managed trunks are present. The OM4 fiber grade positions this patch cable for multimode optical infrastructure rather than single-mode cabling. Its 50/125 µm fiber geometry, female-to-female MPO format, APC polish, and Type B polarity define the physical connection arrangement. These details matter when replacing an existing cable or building a channel that must maintain the intended fiber mapping from one MPO endpoint to the other.