Ditek Versa Module 2 75 V Surge Module

Protect 75 V circuit connections with a Versa Module 2 surge module that terminates through two-pair terminal-block input and output. Ditek DTK-VM2TM75 is intended for use with the supported Versa Module 2 base hardware, adding the circuit-specific protection module required at the protected connection point. Its terminal-block arrangement keeps both input and output wiring within the same two-pair module format. Use this module where the installed base accepts the Versa Module 2 architecture and the connected circuit calls for the 75 V module designation. The two-pair layout is relevant when both protected pairs must pass through terminal-block connections rather than using a single-pair module. Match the voltage designation and terminal-pair count to the circuit and installed base before selecting the module. Within the Versa Module 2 range, the distinguishing details are its 75 V designation and two-pair terminal-block I/O configuration. It is compatible with VM2W4, VM2W8, and VM2R24 base units. This makes it suitable for installations that need a module matched to those base platforms while retaining terminal-block wiring on both sides of the protected circuit path.