Datalogic CM9630 Multi-Interface Connection Module

CM9630 provides RS-232 and USB connectivity in one Datalogic connection module for barcoding environments. The multi-interface layout lets an installer work with either a serial connection or a USB connection while retaining one module type at the device end. It focuses on the interface connection between barcoding equipment and the attached system rather than the scanning function itself. This makes the module relevant where workstations, counters, or industrial terminals do not all use the same connection standard. Use the module when the required system-side interface must be selected between RS-232 and USB. RS-232 supports serial-attached equipment commonly retained in established barcoding environments, while USB supports systems using USB connections. Combining both named interfaces in one module avoids selecting a module defined around only one of these connection types. Check the supported accessory arrangement for the connected Datalogic device before installation, including the required connection cable and interface configuration. The part number CM9630 identifies the multi-interface connection-module version with both RS-232 and USB named as supported interfaces. Its distinction within a connection-module selection is interface flexibility: it addresses serial and USB connection requirements from the same module category. That capability is useful when replacing a module at an existing station, preparing stations with different host-interface requirements, or maintaining a common interface module across mixed barcoding locations.