Connect a C20 power source to a C19 equipment connection where a short, high-current IEC jumper is required. The CCX PWRC19C20-02BWL combines an IEC C20 plug at the source end with an IEC C19 connector at the equipment end. Its 0.6 m (2 ft) length keeps excess cable out of crowded rack power areas while providing a defined connection between compatible power distribution equipment and connected hardware. The cord is rated for 20 A and 250 V and uses blue 12/3 SJT cable. Those electrical and cable-format details matter when matching the cord to a C20-to-C19 power path rather than a lower-current C13/C14 connection. The blue jacket provides a visible distinction where power leads are grouped by equipment type, circuit, or service role. A W-Lock connector format distinguishes this assembly from a standard non-locking C19-to-C20 cord. Select it when the mating equipment, rack PDU, or power-cord retention method calls for that connector style. Verify both endpoint interfaces are IEC C20 and IEC C19 and that the intended circuit supports the cord's 20 A, 250 V rating before installation.