Add a USB-A female connection to a USB-C host port for peripherals and cables that retain a USB-A plug. This adapter pigtail bridges the connector change without replacing the USB-A-side cable. Its USB 3.0 interface supports USB data connections where the connected host, device, and cable all operate in the same USB mode. The single female receptacle provides a direct connection point for one USB-A cable or peripheral. Plug the USB-C male end into the host system, then connect a USB-A device or cable to the female receptacle. This connector arrangement suits laptops, tablets, docks, and other equipment with a USB-C host port that must accept an existing USB-A connection. USB 3.0 has a nominal signaling rate of up to 5 Gbps, subject to the capabilities of the complete connected path. The adapter changes the physical connector interface while retaining USB data connectivity. USBC3MUSBAFPT-AX uses a pigtail construction rather than placing both connector ends in one rigid body. The cable section creates separation between the USB-C plug and USB-A receptacle, which can be useful where adjacent ports, enclosure edges, plug orientation, or cable routing make a direct-mounted adapter less convenient. It provides one USB-A female output from one USB-C male input for a focused USB-A-to-USB-C connection.