Mount VESA-patterned equipment at a magnetic mounting location with this large-format ARMOR-X assembly. It supports both 50 x 50 mm and 75 x 75 mm VESA hole patterns, providing fitment for equipment and mounting plates built around either compact VESA layout. The magnetic interface makes this configuration relevant where the mounting surface is ferrous and a fixed drilled attachment is not required. A short dual 88 mm arm configuration separates this mount from fixed, flush VESA mounting hardware. The arm section adds stand-off and positioning capability between the VESA attachment point and the magnetic base while retaining a compact 88 mm dimension. This arrangement suits installations where equipment needs clearance from the mounting surface or a controlled offset from a metal panel, enclosure, vehicle surface, or work area. VSA-P11-XF2L is the large VESA magnet mount configuration with dual 88 mm short-arm hardware. Match the VESA pattern on the equipment or attached VESA plate to the supported 50 x 50 mm or 75 x 75 mm spacing before installation. The mount is intended for magnetic-surface applications where the VESA attachment, arm length, and mounting position must be selected together.