Connect compatible IT equipment with a C20 inlet to a C19 receptacle using a 7 ft power cord built for rack and cabinet power paths. ADD-C202C19C14G7FBK has a C20 male plug at the supply end and a C19 female connector at the equipment end, establishing the connector orientation needed between a C19 outlet and C20-equipped hardware. The cord is rated for 250 V and 15 A service. The 7 ft length supports installations where a device is mounted several rack units away from its power source or where cable routing follows vertical and horizontal rack management. A C19-to-C20 connection is common around higher-current server, storage, and power-distribution equipment that uses the IEC 60320 C19/C20 interface. Match both connector ends to the installed power equipment before deployment. Fourteen AWG conductors distinguish this cable from lighter-duty power leads used for lower-current connections. The PVC jacket and standard commercial-temperature construction provide a conventional data center and equipment-room power-cord format. Its black finish helps maintain a consistent appearance in rack installations while the C20 plug and C19 connector keep the cable dedicated to the correct IEC power interface.